How to Restore 2016 Jordan 4 'White Cement' Sneakers at Home

The 2025 “White Cement” Jordan 4 re-release has the sneaker world buzzing. But if you’re still holding onto your 2016 pair, there’s no need to panic.

With the right tools, a little patience, and the help of Reshoevn8r’s sneaker care system, you can bring those classics back to life.

In this guide, Vick Almighty walks you through the process of fully restoring a worn 2016 pair—from deep cleaning the upper and outsoles, to repainting scuffed midsoles, to removing yellowing from the netting and soles. If you’re serious about sneaker care, this is the process you need to follow.

Step 1: Start with a Deep Clean Using the Signature Kit

Before any restoration begins, a proper deep clean is essential. Vick uses the Reshoevn8r Signature Shoe Laundry Cleaning Kit, which includes Soft, Medium, and Stiff Bristle brushes, a 4-oz. bottle of cleaning solution, shoe trees, and a laundry bag for machine washing.

Key tips:

• Begin by dry brushing or using an air compressor to remove surface dust and debris.

• Use Goo Gone to remove any stuck-on gum or residue.

• Clean the shoe using all three brushes — Soft for the upper, Medium for the insole and Midsoles, and Stiff for the outsole.

Step 2: Machine Wash with Laundry Pods

After the pre-clean, it’s time to wash the sneakers in a machine. Vick places the shoe, insole, and laces into the Reshoevn8r laundry bag and uses Reshoevn8r Laundry Pods for a deep, effective clean.

Washing instructions:

• Use a normal cycle with cold water.

• Avoid fabric softeners or bleach.

• Let air dry—never put sneakers in the dryer.

Step 3: Remove Yellowing with Sole Revive and UV Setup

Even after a deep clean, older Jordans often show yellowing on the soles and netting. Vick uses Reshoevn8r Sole Revive to tackle this issue, along with a professional-grade UV setup for maximum effect.

Important notes:

• Sole Revive is highly effective on rubber midsoles and outsoles.

• Netting may require multiple UV treatments for noticeable improvement.

• Apply Sole Revive in a thin, even layer before exposing it to UV light.

Step 4: Repaint the Midsole and Add the Speckle Effect

One of the trickiest parts of restoring the White Cement 4s is matching the original grey and speckled midsoles. Vick mixes a custom blend of white, black, red, pink, and brown paint to match the OG colorway.

Painting process:

• Sand down the damaged areas first.

• Apply a base coat of custom-mixed paint.

• Use a toothbrush dipped in black paint to flick on the speckle pattern.

• Finish with a fine brush to detail the speckles and seal the paint.

Final Touch: Lace Up and Rock ‘Em Again

Once the restoration is complete and the yellowing minimized, the only thing left is to relace the sneakers and get them back into your rotation.

Want to restore your pair?
Shop the products used in this video:

• Signature Shoe Cleaning Kit

• Laundry Pods

• Sole Revive

And don’t forget to use code “WHITE CEMENT” for 20% OFF sitewide while the promotion lasts.

Final Thoughts

Whether you’re reviving a grail or trying to save a pair from the deadstock graveyard, restoring your Jordan 4s is easier than you think with the right tools and guidance. Reshoevn8r gives you everything you need to clean, protect, and restore your sneakers — just like Vick Almighty.